Home › E-Liquids › Max 2
Al Fakher Max 2 Troubleshooting Guide
Published 2026 · VapeWholesaleHub trade desk
Most Max 2 field issues have simple causes that shop staff can resolve in minutes.
Every serious sourcing conversation about the Max 2 eventually arrives at troubleshooting guide, usually because it is where cost and risk meet.
Shops that receive a short briefing on troubleshooting guide convert noticeably better than shops that only receive stock.
Why troubleshooting guide matters on the Max 2
Weak vapour usually means a depleted coil or a low charge state.
In practice the decision comes down to three numbers: unit cost, freight per unit and the realistic sell through rate for Max 2.
A burnt note almost always indicates the coil needs replacing.
Reference specification
| Item | Value |
|---|---|
| Model | Max 2 |
| Brand | Al Fakher |
| Category | E-Liquids |
| Battery | 500 mAh |
| Output range | 10-80 W |
| Capacity | 6.0 ml |
| Charging | USB-C 1A |
| Coil options | 0.8 / 1.2 ohm |
| Carton quantity | 120 units |
No draw at all is typically an airflow or connection issue rather than a battery failure.
Practical notes for buyers
In practice the decision comes down to three numbers: unit cost, freight per unit and the realistic sell through rate for Max 2.
Retail staff rarely ask about troubleshooting guide directly, but their questions almost always lead back to it.
Checklist
- Record the arrival condition with photographs on the day of delivery.
- Review the reorder point after one full selling cycle.
- Confirm the exact configuration in writing before the deposit is paid.
- Keep certificates current and filed against the exact model name.
- Check carton quantities against the commercial invoice line by line.
- Retain one sealed sample carton from every batch for reference.
Commercial terms
Commercial terms are usually agreed in three parts: a deposit on confirmation, a balance before shipment and a stated validity window.
Payment history is the single most reliable route to better terms, more than total annual volume.
| Volume tier | Indicative unit level | Lead time |
|---|---|---|
| Carton (99 units) | Tier 1 | 7-12 days |
| Pallet (1360 units) | Tier 2 | 7-12 days |
| Container (14138 units) | Tier 3 | 14-21 days |
Frequently asked questions
What is the most common Max 2 support issue?
Coil life complaints lead, and most are resolved by priming correctly and avoiding chain draws.
Can packaging be adjusted for our market?
Artwork localisation is straightforward; structural changes need larger volumes and a longer lead time.
How quickly can a repeat order be produced?
For established configurations production typically runs two to four weeks, with transit on top depending on the chosen method.
Can several models be mixed in one shipment?
Yes, mixing models and flavours within a carton or pallet is common and usually helps first time buyers test demand.
Final word
Start with one change, measure it over a quarter, then decide whether it deserves to become policy.
Trade enquiry
Quotations, samples and artwork files are available on request. Please state model, quantity per SKU, destination and target delivery window.
Related reading
- Al Fakher Pearl GT New Market Entry Checklist for Bulk Buyers
- Al Fakher Elite 5 Supplier Audit Checklist
- Compliance and Labelling Guide for Al Fakher Max Lite
- Leak Prevention Guide for Al Fakher Max 3
- Al Fakher Prime Air Carton and Pallet Configuration Explained
- Al Fakher Prime Pro Distribution Channels Checklist 2026